Graham Field Mobility Aid 6132A User Manual

6132A: UNIVERSAL FOREARM WALKER ATTACHMENT

ASSEMBLY & OPERATION INSTRUCTIONS

A Graham-Field Brand

Warning: This product should not be used without proper instruction from a healthcare professional.

Warning: Lumex assumes no responsibility for any damage or injury caused by improper installation,

assembly or use of this product.

Warning: If components are damaged or missing, contact your dealer immediately. DO NOT use

substitute parts.

armrest

assembly

armrest

tube

carriage

bolt

carriage bolt,

plain washer, and knob

iron sheet

eight-square washer

and knob

carriage bolt,

plain washer, and knob

iron sheet

upright

walker attachment

(top section only shown)

armrest

Assembly instructions (see above pictures)

3. Install armrest assembly on upright.

1. Install armrest tube in iron sheets.

4. Insert carriage bolts, eight-square washers, and

knobs; tighten until secure.

2. Insert carriage bolts, plain washers, and knobs;

tighten until secure.

5. Install walker attachment

on walker as shown in

picture at right.

Warning: Ensure that all components are securely fastened as described above before use.

WARRANTY

Three year limited warranty. For additional warranty information, please contact your Lumex dealer.

Graham-Field Health Products

Atlanta, Georgia 30360

printed in China