Extruded BACKDRAFT DAMPER
DAMPERS AND LOUVERS
ES-30 SERIES
Vertical Mount - Horizontal Airflow
Application and Design
The ES-30 series is a vertical mounted backdraft damper that is
designed to allow horizontal airflow and prevent reverse airflow.
The damper is opened by air pressure differential and closed by
gravity.
Ratings (See page 2 for specific limitations)
Pressure: 2.5 in. wg (622 Pa) - differential pressure.
Velocity: 2000 fpm (10.2 m/s)
Temperature: 180°F (82ºC)
H*
Standard Construction
Frame: 6063T5 extruded aluminum.
W*
(0.063 in. [1.6mm] thickness)
Blades: 6063T5 extruded aluminum.
(0.050 in. [1.3mm] thickness)
*W & H dimensions furnished approximately 1/4 in. (6mm) under size.
Axle Bearings: Synthetic polycarbonate sleeve type.
Linkage: 1/8 in. (3mm) aluminum.
NOTE: Optional counterbalance weights shown.
Blade Seals: Vinyl.
3"
2" Max.
3"
2" Max.
3"
2"
Size Limitations
Minimum Size (without weights): 4 in.W x 4 in. H
(102mm x 102mm)
Minimum Size (with weights): 6 in. W x 8 in. H
(152mm x 203mm)
Maximum Size: 40 in. W x 52 in. H
(1016mm x 1321mm)
Options and Accessories
• 11/2 in. (38mm) Flange On Discharge: ES-31
• 11/2 in. (38mm) Flange On Intake:
• Counterbalance Weights
• Pull Chain Actuator
ES-32
1 1/2"
1 1/2"
2"
2"
2"
ES-30
ES-31
ES-32
Flange On Intake
No Flange
Flange On Discharge
• Wing Nut Actuator
ES-30
No Flange
ES-31
Flange on Discharge
ES-32
Flange on Intake
|
Grindmaster Coffee Grinder C 2D User Manual
Grizzly Grinder G1036 User Manual
Grizzly Router H6472 User Manual
Harbor Freight Tools Air Compressor 67696 User Manual
Harbor Freight Tools Air Compressor 95499 User Manual
Harbor Freight Tools Impact Driver 92921 User Manual
Hasbro Robotics 27271 Asst User Manual
HP Hewlett Packard Computer Accessories 243431 User Manual
Hunter Fan Noise Reduction Machine 22691 User Manual
Husqvarna Brush Cutter 343R 345RX 343F 345FX 345FXT User Manual