Grizzly Staple Gun H3119 User Manual

ELECTRIC 316" CROWN STAPLER  
MODEL H3119  
INSTRUCTION MANUAL  
COPYRIGHT © OCTOBER, 2002 BY GRIZZLY INDUSTRIAL, INC.  
1821 VALENCIA ST., BELLINGHAM, WA 98227  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
PRINTED IN CHINA  
 
SAFETY  
For Your Own Safety Read Instruction Manual  
Before Operating This Equipment  
The purpose of safety symbols is to attract your attention to possible hazardous  
conditions. This manual uses a series of symbols and signal words which are  
intended to convey the level of importance of the safety messages. The progres-  
sion of symbols is described below. Remember that safety messages by them-  
selves do not eliminate danger and are not a substitute for proper accident pre-  
vention measures.  
Indicates an imminently hazardous situation which, if  
not avoided, WILL result in death or serious injury.  
Indicates a potentially hazardous situation which, if  
not avoided, COULD result in death or serious injury.  
Indicates a potentially hazardous situation which, if  
not avoided, MAY result in minor or moderate injury.  
It may also be used to alert against unsafe practices.  
This symbol is used to alert the user to useful information  
about proper operation of the equipment.  
NOTICE  
Safety Instructions  
1. KEEP ALL SAFETY DEVICES IN  
6. WEAR PROPER APPAREL. Do  
not wear loose clothing, gloves,  
neckties, rings, bracelets, or other  
jewelry which may get caught in  
moving parts. Non-slip footwear is  
recommended. Wear protective  
hair covering to contain long hair.  
PLACE and in working order.  
2. REMOVE ADJUSTING KEYS AND  
WRENCHES. Form habit of check-  
ing to see that keys and adjusting  
wrenches are removed from winch  
before operation.  
7. ALWAYS USE SAFETY GLASS-  
ES. Also use face or dust mask if  
cutting operation is dusty. Everyday  
eyeglasses only have impact resis-  
tant lenses, they are NOT safety  
glasses.  
3. KEEP CHILDREN AWAY. All chil-  
dren should be kept at a safe dis-  
tance from winch.  
4. DO NOT USE UNDER THE INFLU-  
ENCE OF DRUGS OR ALCOHOL.  
5. NEVER ALLOW UNTRAINED  
USERS TO RUN THIS TOOL  
WHILE UNSUPERVISED.  
8. IF YOU ARE UNSURE OF THE  
INTENDED OPERATION, STOP  
USING THE TOOL.  
H3119 Electric 316" Crown Stapler  
-1-  
 
Safety Instructions For Power Tools  
14. MAINTAIN TOOLS WITH CARE.  
Keep tools sharp and clean for  
best and safest performance.  
Follow instructions for lubricating  
and changing accessories.  
9. USE PROPER EXTENSION CORD  
for the tool. Make sure your exten-  
sion cord is in good condition.  
Conductor size should be in accor-  
dance with the chart below. The  
amperage rating should be listed on  
the motor or tool nameplate. An  
undersized cord will cause a drop in  
line voltage resulting in loss of power  
and overheating. Your extension  
cord must also contain a ground wire  
and plug pin. Always repair or  
replace extension cords if they  
become damaged.  
15. DISCONNECT TOOLS before ser-  
vicing and changing accessories,  
such as blades, bits, cutters, and  
the like.  
16. REDUCE THE RISK OF UNIN-  
TENTIONAL STARTING. Make  
sure switch is in off position before  
plugging in.  
17. USE RECOMMENDED ACCES-  
SORIES. Consult the owner’s  
manual for recommended acces-  
sories. The use of improper acces-  
sories may cause risk of injury.  
Minimum Gauge for Extension Cords  
AMP  
RATING  
0-6  
LENGTH  
50ft  
16  
25ft  
18  
18  
16  
14  
12  
10  
100ft  
16  
14  
14  
12  
18. CHECK DAMAGED PARTS.  
Before further use of the tool, a  
guard or other part that is dam-  
aged should be carefully checked  
to determine that it will operate  
properly and perform its intended  
function. Check for alignment of  
moving parts, binding of moving  
parts, breakage of parts, mount-  
ing, and any other conditions that  
may affect its operation. A guard or  
other part that is damaged should  
be properly repaired or replaced.  
7-10  
16  
16  
12  
12  
11-12  
13-16  
17-20  
21-30  
10  
No  
10  
10. WEAR PROPER APPAREL. Do not  
wear loose clothing, gloves, neck-  
ties, rings, bracelets, or other jewel-  
ry which may get caught in moving  
parts. Non-slip footwear is recom-  
mended. Wear protective hair cover-  
ing to contain long hair.  
11. ALWAYS USE SAFETY GLASSES.  
Also use face or dust mask if cutting  
operation is dusty. Everyday eye-  
glasses only have impact resistant  
lenses, they are NOT safety glass-  
es.  
No list of safety guidelines can be  
complete. Operating this tool may  
require additional safety precau-  
tions specific to your working  
environment. Failure to use rea-  
sonable caution while operating  
this tool could result in serious  
personal injury.  
12. SECURE WORK. Use clamps or a  
vise to hold work when practical. It’s  
safer than using your hand and frees  
both hands to operate tool.  
13. DON’T OVERREACH. Keep proper  
footing and balance at all times.  
H3119 Electric 316" Crown Stapler  
-2-  
 
INTRODUCTION  
We are pleased to provide this manual with  
Commentary  
the Model H3119. It was written to encour-  
age safety considerations and guide you  
through general operating procedures and  
maintenance. This manual represents our  
effort to produce the best documentation  
possible.  
The specifications, details, and pho-  
tographs in this manual represent the  
Model H3119 as supplied when the manu-  
al was prepared. However, owing to  
Grizzly’s policy of continuous improve-  
ment, changes may be made at any time  
with no obligation on the part of Grizzly. If  
you have any comments regarding this  
manual, please write to us at the address  
below:  
Lack of familiarity with this manual  
could cause serious personal injury.  
Spend a sufficient amount of time  
becoming familiar the contents of  
this manual, including all the safety  
warnings.  
Grizzly Industrial, Inc.  
Technical Documentation  
P.O. Box 2069  
C
/O  
We are proud to offer the Grizzly Model  
H3119 Electric 316" Crown Stapler. This  
model is part of a growing Grizzly family of  
fine power tools. When used according to  
the guidelines set forth in this manual, you  
can expect years of trouble-free, enjoy-  
able operation and proof of Grizzly’s com-  
mitment to customer satisfaction.  
Bellingham, WA 98227-2069  
Most importantly, we stand behind our  
tools. If you have any service questions or  
parts requests, please call or write us at  
the location listed below.  
Grizzly Industrial, Inc.  
1203 Lycoming Mall Circle  
Muncy, PA 17756  
Phone: (570) 546-9663  
Fax: (800) 438-5901  
The Model H3119 is a high powered elec-  
tric stapler capable of firing 20 gauge, 316"  
1
crown staples in lengths ranging from 4  
"
9
to ⁄16". The quick loading magazine holds  
85 staples and the weight is 3.25 lbs.  
The Model H3119 is best suited for instal-  
lation of carpet, insulation, ceiling tiles,  
cabinets and HVAC systems.  
H3119 Electric 316" Crown Stapler  
-3-  
 
OPERATION  
Getting Started  
Using The Stapler  
Please take the time to become familiar  
with this instruction manual. The informa-  
tion contained will allow you to get the  
maximum enjoyment and use from your  
new tool.  
DO NOT pull the trigger until the tip  
of the stapler is against the surface  
to be stapled. The stapler does NOT  
have a safety mechanism.  
Loading The Stapler  
1. Be sure the stapler is loaded and the  
The Model H3119 can hold up to 85 sta-  
ples in the quick loading magazine.  
magazine is closed securely.  
2. Wear safety glasses when using the  
To load the stapler:  
stapler  
1. Unplug the tool from the power  
source!  
3. Plug the stapler into a 110V power  
source.  
2. Press the silver lever while sliding back  
4. Place the tip of the stapler against the  
on the staple magazine.  
workpiece and pull the trigger.  
3. Point the tip of the stapler upward to  
reveal the stapler loading area. The  
loading area consists of a groove or  
channel that runs along the bottom of  
the stapler.  
Avoid repeatedly shooting staples  
into the exact same location without  
moving the tip of the stapler. A staple  
could become jammed in the tip of  
the stapler.  
4. Load a stick of 20 gauge 316" crown  
1
9
staples ⁄4" to 16" long into the loading  
area.  
5. Slowly slide the staple magazine back  
into the closed position until the silver  
lever latches in the closed position.  
H3119 Electric 316" Crown Stapler  
-4-  
 
Clearing Jammed Staples  
Maintenance  
Staple jams are an inevitable part of oper-  
ating any stapler.  
Unplug the stapler from the power  
source before performing any mainte-  
nance!  
To clear a jammed stapler:  
Cleaning The Stapler  
1. Unplug the tool from the power  
source!  
While wearing safety glasses, periodically  
clean the stapler with compressed air. DO  
NOT use flammable products to clean the  
stapler.  
2. Open the staple magazine and remove  
all un-jammed staples.  
3. The jammed staple may be easily  
removed at this time; otherwise, the  
stapler tip will need to be disassem-  
bled.  
4. To disassemble the tip, use an allen  
wrench to remove the three allen head  
cap screws from the face of the tip.  
5. Once the screws are removed and the  
staple magazine is open, the tip piece  
should pull away from the stapler.  
Gasoline or petroleum products used  
to clean the tool could explode caus-  
ing serious personal injury. DO NOT  
use gasoline or petroleum products  
to clean the tool.  
6. The jammed staple should now be  
easy to remove.  
7. Once the jammed staple is removed,  
re-assemble the stapler.  
H3119 Electric 316" Crown Stapler  
-5-  
 
WARRANTY AND RETURNS  
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original  
purchaser from the date of purchase. This warranty does not apply to defects due directly  
or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main-  
tenance. This is Grizzly’s sole written warranty and any and all warranties that may be  
implied by law, including any merchantability or fitness, for any particular purpose, are here-  
by limited to the duration of this written warranty. We do not warrant or represent that the  
merchandise complies with the provisions of any law or acts unless the manufacturer so  
warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price  
paid for the product and any legal actions brought against Grizzly shall be tried in the State  
of Washington, County of Whatcom.  
We shall in no event be liable for death, injuries to persons or property or for incidental, con-  
tingent, special, or consequential damages arising from the use of our products.  
To take advantage of this warranty, contact us by mail or phone and give us all the details.  
We will then issue you a “Return Authorization Number,” which must be clearly posted on  
the outside as well as the inside of the carton. We will not accept any item back without this  
number. Proof of purchase must accompany the merchandise.  
The manufacturers reserve the right to change specifications at any time because they con-  
stantly strive to achieve better quality equipment. We make every effort to ensure that our  
products meet high quality and durability standards and we hope you never need to use this  
warranty.  
Please feel free to write or call us if you have any questions about the machine or the man-  
ual.  
Grizzly Industrial, Inc.  
1203 Lycoming Mall Circle  
Muncy, PA 17756  
Phone: (570) 546-9663  
Fax: (800) 438-5901  
E-Mail:  
Thank you again for your business and continued support. We hope to serve you again  
soon!  
H3119 Electric 316" Crown Stapler  
-6-  
 
 
REF PART #  
DESCRIPTION  
CYLINDER CAP ASSEMBLY  
PLUNGER  
REF PART #  
DESCRIPTION  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
PH3119001  
PH3119002  
PH3119003  
PH3119004  
PH3119005  
PH3119006  
PH3119007  
PH3119008  
PH3119009  
PFH27  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
PH3119029  
PH3119030  
PH3119031  
PH3119032  
PH3119033  
PH3119034  
PSB41  
SPRING  
BASE  
PIN  
MAGAZINE SUPPORT  
PIN  
PLUNGER BLADE  
PLUNGER RET. WASHER  
RETURN SPRING  
CLIP  
E-CLIP  
SUPPORT SPACER  
SCREW 10-24 X 1/2"  
LOCK NUT 10-32  
POWER SUPPLY  
LOCK WASHER #6  
PHLP HD SCR 6-32 X 3/8"  
INSULATION SLEEVING  
LOCK NUT 6-32  
FUSE HOLDER  
LOCATOR RING  
HANDLE (RIGHT)  
FLAT HD ALLEN SCR 8-32 X 3/4"  
LOCK NUT 8-32  
CAP SCREW 8-32 X 7/8"  
FLAT HD ALLEN SCR 8-32 X 1-5/16"  
HANDLE (LEFT)  
RING  
PLN10  
PH3119037  
PLW08  
PLN09  
PS36  
PSB67  
PH3119040  
PLN11  
PFH28  
PH3119014  
PH3119015  
PH3119016  
PH3119017  
PSB38  
PH3119042  
PSB69  
CAP SCREW 6-32 X 3/8"  
CORD ASSEMBLY  
SWITCH PROTECTOR  
SWITCH ASSEMBLY  
CONTACT PIN  
COIL/WASHER ASSEMBLY  
STAPLER BODY  
SCREW 10-32 X 3/8"  
BUMPER  
PH3119044  
PH3119045  
PH3119046  
PH3119047  
PH3119048  
PH3119049  
PLW01  
PH3119019  
PH3119020  
PH3119021  
PSB68  
NOSE RETAINER  
CLAMP  
SPRING  
TRIGGER BRACKET  
LOCK WASHER 5/16"  
HEX NUT 5/16"-24  
SPRING  
CAP SCREW 10-32 X 1/2"  
SCREW 10-24 X 3/4"  
PIN  
PSB33  
PN20  
PH3119024  
PH3119025  
PH3119026  
PH3119027  
PH3119028  
PH3119052  
PH3119053  
PH3119054  
PH3119055  
PH3119056  
PH3119057  
NOSE  
CONTACT BUTTON  
TRIGGER  
PIN  
PUSHER  
RETAINING RING  
TRIGGER PIN  
MAGAZINE BASE  
CARRYING CASE (NOT SHOWN)  
H3119 Electric 316" Crown Stapler  
-8-  
 
NOTES  
H3119 Electric 316" Crown Stapler  
-9-  
 
NOTES  
H3119 Electric 316" Crown Stapler  
-10-  
 
WARRANTY CARD  
Name__________________________________________________________  
Street__________________________________________________________  
City____________________State________Zip_________  
Phone Number____________E-Mail___________________FAX____________  
Model #___________________________ Serial #______________________  
The following information is given on a voluntary basis. It will be used for marketing purposes to help  
us develop better products and services. Of course, all information is strictly confidential.  
9. How many of the machines checked above are  
Grizzly? ____________  
1. How did you learn about us?  
___Advertisement  
___Friend  
___Catalog  
___World Wide Web  
___Other__________________________  
___Card Deck  
10. Which portable/hand held power tools do you own?  
Check all that apply.  
___Belt Sander  
___Biscuit Joiner  
___Circular Saw  
___Detail Sander  
___Drill/Driver  
___Orbital Sander  
___Palm Sander  
___Portable Planer  
___Saber Saw  
___Reciprocating Saw  
___Router  
2. What is your annual household income?  
___$20,000-$29,999  
___$30,000-$39,999  
___$40,000-$49,999  
___$50,000-$59,999  
___$60,000-$69,999  
___$70,000-$79,999  
___$80,000-$89,999  
___$90,000 +  
___Miter Saw  
___Other_________________________________  
3. What is your age group?  
___20-29  
11. What machines/supplies would you like Grizzly  
Industrial to carry?  
___50-59  
___60-69  
___70 +  
___30-39  
___40-49  
________________________________________  
________________________________________  
________________________________________  
________________________________________  
4. How long have you been a woodworker?  
___0 - 2 Years  
___2 - 8 Years  
___8 - 20 Years  
___20+ Years  
12. What new accessories would you like Grizzly  
Industrial to carry?  
5. How would you rank your woodworking skills?  
________________________________________  
________________________________________  
________________________________________  
________________________________________  
___Simple  
___Advanced  
___Intermediate  
___Master Craftsman  
6. What stationary woodworking tools do you own?  
Check all that apply.  
13. What other companies do you purchase your tools  
and supplies from?  
___Air Compressor  
___Band Saw  
___Panel Saw  
___Planer  
_________________________________________  
_________________________________________  
_________________________________________  
___Drill Press  
___Power Feeder  
___Radial Arm Saw  
___Shaper  
___Jointer  
___Lathe  
___Drum Sander  
___Dust Collector  
___Spindle Sander  
___Table Saw  
14. Do you think your purchase represents good value?  
___Yes  
___No  
___Mortiser  
___Wide Belt Sander  
___Horiz.Boring Machine  
___Vacuum Veneer Press  
___Other______________________________  
15. Would you recommend Grizzly to a friend?  
___Yes ___No  
16. Would you allow us to use your name as a refer-  
ence for Grizzly customers in your area? Note: We  
never use names more than three times.  
7. How many of your woodworking machines are  
Grizzly? _____________  
___Yes  
___No  
8. Which benchtop tools do you own? Check all  
that apply.  
17.Comments:________________________________  
_________________________________________  
_________________________________________  
_________________________________________  
___1"x42" Belt Sander ___6" - 8" Grinder  
___5" - 8" Drill Press ___Mini Lathe  
___8" Table Saw  
___Scroll Saw  
___8" - 10" Bandsaw  
___Disc/Belt Sander  
___Spindle/Belt Sander ___Mini Jointer  
___10"-12"Thickness Planer  
___Other______________________________  
 
Send a Grizzly Catalog to a friend:  
Name________________________________  
Street________________________________  
City______________State______Zip_______  
FOLD ALONG DOTTED LINE  
Place  
Stamp  
Here  
GRIZZLY INDUSTRIAL, INC.  
P.O. BOX 2069  
BELLINGHAM, WA 98227-2069  
TAPE ALONG EDGES--PLEASE DO NOT NAIL  
 
 
 

Grace Network Card GDI IRP600 User Manual
Graco Inc Paint Sprayer ti5406a User Manual
GSI Outdoors Fan 2TAF User Manual
HANNspree Computer Monitor M19N2 User Manual
Hans Grohe Indoor Furnishings 40141000 User Manual
Honeywell Automobile Parts ML6874 User Manual
Honeywell Boiler S9360A User Manual
Honeywell Thermostat 2450A User Manual
Hotpoint Washer Dryer WDUD 9640 User Manual
HP Hewlett Packard Electric Shaver HP6409 User Manual