Harbor Freight Tools Work Light 94137 User Manual

SUBMERSIBLE TRAILER LIGHT KIT  
Model 94137  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS.  
©
Copyright 2006 by Harbor Freight Tools®. All rights reserved. No portion of this  
instruction sheet or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions, please call 1-800-444-3353.  
PRODUCT SPECIFICATIONS  
Item  
Description  
12 Volt DC / Negative Ground  
Submersible Design  
2 Combination, Class A, Stop-Tail-Turn Lights  
License Plate Bracket  
Power Source  
Design Type  
Features  
25 Ft., Split Y-Style Harness  
4 Ft., Color Coded Trunk Harness  
18 LED’s Per Light (not serviceable)  
Yes  
Light Type  
DOT Approved  
Weight  
3 Pounds  
SAVE THIS INSTRUCTION SHEET  
You will need this instruction sheet for the safety warnings and precautions, assembly instructions, parts  
list, and assembly diagram. Keep your invoice with this instruction sheet. Write the invoice number on the  
front of this instruction sheet. Keep this instruction sheet and invoice in a safe and dry place for future  
reference.  
UNPACKING  
When unpacking, check to make sure all the parts shown on the Assembly Diagram are included. If any  
parts are missing or broken, please call Harbor FreightTools at the number above as soon as possible.  
SAFETY WARNINGS AND PRECAUTIONS  
1.  
2.  
Use eye protection. Make sure to wear ANSI approved safety impact eye goggles when installing this  
Light Kit.  
Prior to installing this product, make sure to read and understand all instructions and safety precau-  
tions as outlined in the(trailer, camper, etc.) manufacturer’s manual onto which the Light Kit will be  
installed.  
 
Trailer Light Mounting And Connection:  
1.  
Mount the Stop-Tail-Turn Light (1), marked “L.H.(with the License Window), on the left rear of the  
trailer with its side marker to the outside of the trailer. Then, mount the License Plate Bracket (2) with the  
Stop-Tail-Turn Light. (See Illustration on previous page)  
2.  
3.  
Mount the Stop-Tail-Turn Light (1), marked “R.H.(without the License Window), on the right rear of  
the trailer with its side marker to the outside of the trailer. (See Assy. Diagram)  
Use the Metal Frame Clips included in the Mounting Hardware Package (5) to mount each half of the  
Split Y-Style Harness (3) down each side of the trailer. Run the YELLOW and BROWN wires down the  
left side and GREEN and BROWN wires down the right side of the trailer. (See Assy. Diagram)  
4.  
5.  
Connect the YELLOW and BROWN wires to the left hand Stop-Tail-turn Light (1) with the Wire Nut  
Connectors included in the Mounting Hardware Package (5). (See Assy. Diagram)  
Connect the GREEN and BROWN wires to the right hand Stop-Tail-turn Light (1) with the Wire Nut  
Connectors included in the Mounting Hardware Package (5). (See Assy. Diagram)  
6.  
7.  
Attach the WHITE GROUND wire to the trailer tongue or frame. (See Assy. Diagram)  
Connect the Split Y-Style Harness (3) Plug to the Color Coded Trunk Harness (4) Plug.  
(See Assy. Diagram)  
8.  
9.  
Turn on the towing vehicle’s headlights. The two Stop-Turn-Tail Lights (1) should turn on. The brighter  
Stop Lights should turn on only when the vehicle’s brake pedal is depressed, or when the vehicle’s turn  
signal is activated (ignition key must be in its “on” position).  
If the Light Kit fails to illuminate, check all ground connections. If the turn signals on the Light Kit do not  
illuminate, check the connections between the towing vehicle’s wiring and the Color Coded Trunk Har-  
ness (4). (See Assy. Diagram.)  
1
1
3, 4  
2
5: MOUNTING HARDWARE  
NOT SHOWN.  
(Due to continuing improvements, actual product may differ slightly from the product described herein.)  
Part #  
1
2
3
Description  
Qty.  
Part #  
4
5
Description  
Color Coded Trunk Harness  
Mounting Hardware (1 package)  
Qty.  
1
1
Stop-Tail-Turn Light  
License Plate Bracket  
Split Y-Style Harness  
2
1
1
NOTE: Some parts are listed and shown for illustration purposes only, and are not  
available individually as replacement parts.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A  
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF  
ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER  
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY  
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT  
OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER  
INSTALLATION OF REPLACEMENT PARTS THERETO.  
SKU 94137  
For technical questions, please call 1-800-444-3353  
PAGE 3  
 

Harbor Freight Tools Automobile Parts 68122 User Manual
Harbor Freight Tools Stove 44894 User Manual
Heat Glo LifeStyle Outdoor Fireplace PCFM HNG User Manual
Heath Zenith Home Security System CB 2010 User Manual
Heatiator Indoor Fireplace HD36B User Manual
HP Hewlett Packard Cell Phone H5100 User Manual
HP Hewlett Packard Network Cables 8505A User Manual
Hunter Fan Outdoor Ceiling Fan 27178 User Manual
Husqvarna Lawn Mower 532 42 57 62 User Manual
Hypertec Indoor Furnishings Simple Footrest User Manual